➙Description
*Push-pull cap included in the Pint & Quart is temporarily unavailable due to supply
Visit: https://screenprintdirect.com/....products/rapid-cure-
➨ Key Benefits:
➛ Cures at 270°F
➛ Softer hand prints
➛ Utilize Higher Mesh Counts for Finer Print Detail
➛ CPSIA Compliant
➛ Modifies the Flow and Printing Characteristics of the Ink
➛ Easy to Work With, Mixes in Easily
➛ Non-Hazardous Ink Reducer
➛ Does Not Affect Color (Dulling of Ink)
➛ Does Not Affect Curing

➙Ecotex® Screen Printing Curable Reducer by Screen Print Direct® is a Phthalate-free plastisol ink reducer and ink thinner. Add this 100% curable reducer to plastisol inks to create a softer hand and reduce viscosity. We recommend mixing 2%-5% by weight to the ink as a starting point. 10% can be added to the ink before affecting opacity. We suggest that you do a test print to check the bleed, color strength, and opacity after the reducer is added.

➙ For information on curable reducers and how to use them visit our blog - Curable Reducer for Dummies

➙ Shelf Life:
+12 months

➙ For best results follow the steps below.

1. Mix in 2-5% by weight depending on the ink you are using. Some plastisol ink may be able to go up to 10% by weight.

➛ Disclaimer: Exceeding 2-5% by weight and for some plastisol ink 10% by weight, will begin to reduce the opacity of the ink.

➨ Quick Tip:

Flashing: Flash for 2-3 seconds. Ink deposit reaches 150-250°F (65-121°C). This varies between all flash units.

Curing - Cure at 270°F (132°C) for 1 minute to 90 second period (depending on the thickness of the ink deposit and oven type.) A thicker deposit takes longer to cure, heat must penetrate through the entire ink layer.